SoundMasker

Home / Guides / Sound masking / Texas

Dallas, Houston, and Austin

Sound masking in Texas

People looking for sound masking in Texas are almost always looking at a building in Dallas, Houston, or Austin. Those cities are hours apart, so a company that will survey a floor in one of them is not automatically the company for the other two. This page covers what the work costs, what to have ready, and how to get quotes from companies that will come to the building you have.

1

One description, quotes you can compare

Describe the space once. We pass it to as many installers in Texas as we can, so the first number is not the only number.

2

Name the city

Dallas, Houston, and Austin are different visits. A quote from someone who will not survey the building is a guess.

3

The ceiling sets the price

The cost range is the same one used everywhere. An open ceiling and an occupied floor move it more than which Texas city the building is in.

How to get quotes in Texas

  1. Write down the city, the square footage, and the ceiling: tile, open, or a hard lid.
  2. Note whether people are already working there, and when you would want it done.
  3. Send that on the form. The state is already filled in. Add the city, and we pass it to as many companies as cover it.
Where to put the speaker: texas

Dallas, Houston, and Austin

Dallas is where this search concentrates. Houston and Austin come up as well, and a company with an office in one of them may treat the others as a trip. Put the city on the form. If the organisation has floors in more than one of them, say that too: a rollout across the three is a different job from a single building.

A company that covers the whole state will say so, and will still need the address of the building it is being asked to survey. Distance is the practical question, not the state line.

Dallas, Houston, and Austin

Get quotes for a Texas building

Tell us the city, the size, and the ceiling. We pass it to as many installers and suppliers as cover that part of Texas. Free, and no obligation.

Get a free quote

What to budget

Installed systems run about $1.50 to $2.50 per square foot in a new fit-out, and $2.00 to $3.00 where people are already working and the crew has to fit around them. An open or exposed ceiling adds about twenty to forty per cent, because the speakers have to be aimed and finished rather than set into a tile. Commissioning, the visit that sets the level with a meter and writes it down, is usually $1,500 to $4,000.

A 10,000 square foot retrofit is usually $20,000 to $30,000 before that visit. Nothing in that range is a Dallas price or a Houston price. Read a quote against the ceiling and whether the floor is occupied. The sound masking system page sets the same figures out in more detail.

Who you will hear from

Some companies will travel between these cities, and some will only take a job they can survey from their own office. A small suite or a few rooms is often too small for a company whose work is whole floors, and those enquiries go quiet for that reason.

For a space that size we also pass the brief to suppliers who sell a complete kit and advise from a floor plan. You pay nothing to ask, and you are not obliged to accept any quote that comes back.

What you need

  • The city: Dallas, Houston, Austin, or somewhere else in the state
  • Square footage of the area to be covered
  • Ceiling type, and whether people are working there now
  • A floor plan, which every company will ask for

Mistakes to avoid

  • Treating a Dallas quote as the price for a Houston building
  • Leaving the city off the form
  • Accepting a quote where commissioning is not its own line
  • Assuming a few rooms is too small to be worth asking about

Questions

How much does sound masking cost in Dallas?

The same range as anywhere else in the country: about $1.50 to $2.50 per square foot for a new fit-out and $2.00 to $3.00 for a retrofit in an occupied office, plus $1,500 to $4,000 to commission it. The ceiling and whether the floor is in use move the number more than the city.

Will a Houston company quote a building in Austin?

Some cover all three cities and some do not. Name the city of the building. We pass the enquiry to companies that cover that city, rather than to anyone who merely works somewhere in Texas.

What about a small office?

A survey and commissioning visit costs a company real money, so a few rooms often get no reply from firms that install whole floors. Those enquiries go to suppliers who sell a complete kit and advise by phone.

Does SoundMasker install systems in Texas?

No. We pass the enquiry to companies that do. You pay nothing, and there is no obligation to go ahead.

Get it quoted

Tell us about the space and we will pass it to as many installers in your area as we can, so you get real quotes to compare. They survey it, fit the system, and tune it. Free, and nothing to pay at any point.

Related