Home / Guides / Sound masking / Acoustic consultants
When to pay for an assessment
When an acoustic consultant is worth it
An acoustic consultant measures a space, works out which of several possible problems you actually have, and writes a specification that installers bid against. They sell advice rather than hardware, which is the main reason to involve one. This page is about when that is worth the money and when it is not, because for a lot of offices it genuinely is not.
Advice from someone not selling boxes
A consultant has no product to place. On a large or unusual project that independence is most of the value.
A specification, so bids are comparable
Without one, three quotes describe three different jobs and the cheapest looks best. With one, they are comparing like for like.
Find out first whether you need one
Most offices can work out which problem they have with a clap and a conversation. This page says when that is enough and when it is not.
How to tell whether you need one
- Clap hard in the empty space. A bright ringing tail means the room needs absorption.
- Have someone speak from where the overhearing happens, and note whether you catch words or just a voice.
- If you catch words in a room that does not ring, masking is most of your answer and an installer can quote that without a consultant in front of it.
- If you cannot tell which problem you have, the building is unusual, or the project is large or legally sensitive, that is when an assessment pays for itself.
What they actually do
A consultant measures background levels and reverberation, looks at the wall assemblies, the ceiling, the plenum and the air handling, and identifies which paths are carrying sound. They then produce a specification: what to absorb, what to block, what level masking should be tuned to, and how the space should be zoned.
They are also the people who verify the result afterwards, using a defined method such as ASTM E1130 rather than an opinion. On a project with a compliance requirement behind it, that documentation is the deliverable.
What it costs, and how they differ from installers
An acoustic assessment usually runs $1,000 to $5,000 depending on the size of the space and whether a report is needed for a third party. Larger projects are priced as a design fee.
Installers and manufacturers will often do a free design, which is genuinely useful and also, reasonably enough, arrives recommending their own product. Both have a place. The design is free because they expect to supply the job; the assessment is paid because nobody is supplying anything.
When it is worth it
Four cases, roughly. A large or multi-floor project, where the cost of specifying the wrong thing dwarfs the fee. A compliance or dispute situation, where a measurement by a named method is the point. A building that has already had money spent on it without the problem going away. And new construction, where decisions made at design stage are far cheaper than retrofitting them.
It is also worth it when several contractors are bidding and you want the bids to describe the same job.
When you can skip it
A small space with an obvious single problem usually does not need one. A dentist with a reception desk that can be overheard, a therapist with one room, a small office where the clap test rings and the ceiling is clearly bare: in those cases the diagnosis is not in doubt and the fee would be a large share of the total budget.
The test is roughly whether you can state the problem in one sentence and whether anyone else has to be convinced. If yes to the first and no to the second, spend the money on the fix.
What you need
- A floor plan, which is the first thing anyone will ask for
- A sound level meter app, for a rough background figure
- A note of when and where the problem happens
- Your lease, if construction might be involved
Mistakes to avoid
- Paying for an assessment on a one-room problem you can already describe
- Taking a free vendor design as an independent diagnosis
- Comparing three quotes written against three different scopes
- Leaving verification out of a project that has a compliance driver
Questions
What does an acoustic consultant do?
Measures a space, works out which paths are carrying sound, and writes a specification covering absorption, blocking, masking levels, and zoning. They sell advice rather than equipment, and they verify the result afterwards.
How much does an acoustic assessment cost?
Usually $1,000 to $5,000 for an office, depending on size and whether a formal report is required. Larger projects are quoted as a design fee.
Do I need a consultant for sound masking?
Not for a small space with one obvious problem. Yes for a large or multi-floor project, a compliance or dispute situation, a building where money has already been spent without success, or new construction.
Is a free vendor design the same thing?
It is useful and it is not independent. A manufacturer or installer designing for free expects to supply the job, so the design arrives built around their product.
Get it quoted
Tell us about the space and we will pass it to as many installers in your area as we can, so you get real quotes to compare. They survey it, fit the system, and tune it. Free, and nothing to pay at any point.
