Home / Guides / Sound masking / Call centers
For contact centers and busy phone floors
Call center background noise
A call floor has a problem most offices do not: the noise is other people talking, their microphones are open, and the customer on the line hears it too. That changes what helps. Absorption and screens do most of the work, headsets do more than people expect, and masking has to be used with more care here than anywhere else. This page explains why.
Cross-talk is the real cost
A customer hearing another agent's conversation is a privacy and quality problem, not just an annoyance. It is also the part that is measurable.
Fatigue is the other one
Agents raise their voices to be heard over each other, which raises the floor further. Breaking that loop is worth more than any single purchase.
Careful with masking on an open mic
Masking works on a call floor, and it belongs in the right places at the right level. This page says where.
How to approach it
- Listen to a recorded call and note what is audible behind the agent. That is what you are trying to reduce.
- Start with absorption and screens at the positions, not with sound.
- Keep masking out of the immediate pickup area of open microphones. Put it in corridors, break-out spaces, and the boundary between the phone floor and the rest of the office.
- Set it low. On a call floor the aim is to stop speech carrying across the room, not to add to what the microphone hears.
The cross-talk loop
Agents talk, the floor gets louder, agents raise their voices to hear themselves, and the floor gets louder again. The result is both a tiring place to work and audible other-customer conversation on every call, which in a regulated industry is a compliance matter rather than a comfort one.
Breaking the loop means reducing what arrives at each position: absorbent surfaces so speech does not reflect around the room, screens tall enough to interrupt the path between facing agents, and enough spacing that the nearest voice is not the loudest thing in the room.
Absorption and layout first
A call floor is the clearest case for treating the ceiling well, because it is a large room full of people all talking at once and every reflection lands on someone. A high-absorption suspended ceiling plus panels on facing hard surfaces does more here than in almost any other office type.
Screens need to break seated sight lines to do anything, which means well above seated head height, with the absorbent face pointing at the agent. Back-to-back layouts with a tall absorbent divider work better than facing rows.
Headsets do more than expected
A noise-cancelling microphone boom, positioned properly, is often the single most effective change for what the customer hears, because it rejects sound arriving from off-axis. Binaural headsets let agents hear the call at a lower volume, which lowers how loudly they speak, which lowers the floor.
This is the cheapest intervention on the list and the one most often skipped in favour of building work.
Where masking belongs on a call floor
Masking is useful here, with a caveat that does not apply elsewhere: a steady noise added within the pickup pattern of an open microphone goes down the line with everything else. Keep it out of the immediate area of the positions.
Where it works well is in corridors, break-out areas, quality monitoring rooms, and the boundary between the phone floor and the offices beyond it, where the aim is to stop the hum of the floor carrying into spaces that need quiet. Back-office and monitoring desks away from the phones can use it directly.
What you need
- Noise-cancelling boom microphones, positioned close and on-axis
- A high-absorption ceiling, which matters more here than anywhere
- Tall screens with the absorbent face towards the agent
- Masking for corridors, break-out areas, and the floor boundary
Mistakes to avoid
- Masking inside the pickup area of open microphones
- Low screens between facing agents
- Raising headset volume as the fix for a loud floor
- Treating cross-talk as a comfort issue in a regulated environment
Questions
How do you reduce background noise in a call center?
Absorb with a high-rated ceiling and panels, screen between agents at above seated head height, use noise-cancelling boom microphones positioned properly, and mask the corridors and boundaries rather than the positions themselves.
Does sound masking work in a call center?
Yes, with care. Keep it out of the immediate pickup area of open microphones, because anything steady there is transmitted on the call. It works well in corridors, break-out areas, monitoring rooms, and at the boundary with the rest of the office.
Why can customers hear other agents?
Because the microphones are open and the floor is reflective enough that nearby conversations arrive at every position. Absorption, screening, and microphone choice all reduce it.
What is the cheapest improvement on a call floor?
Usually headsets. A properly positioned noise-cancelling boom rejects off-axis sound, and binaural audio lets agents listen at a lower level, which makes them speak more quietly.
Get it quoted
Tell us about the space and we will pass it to as many installers in your area as we can, so you get real quotes to compare. They survey it, fit the system, and tune it. Free, and nothing to pay at any point.
