Home / Guides / Sound masking / Office acoustic panels
What to do before masking
Office acoustic panels, and the order to do things in
Acoustic panels and masking solve different problems and are constantly confused. Panels reduce how much sound bounces around a room. Masking raises the background so distant speech stops being intelligible. If a space has hard floors, glass walls, and a bare ceiling, panels come first, and adding masking before them makes the room worse. This page explains which problem you have.
Work out which problem you have
A room that rings and a room where you can hear every conversation need different money spent on them. They are easy to tell apart once you know what to listen for.
Get the order right
Absorb, block, cover, and distance, in that order. Masking laid over an untreated reverberant room produces a diffuse hiss people hate.
Know what panels cannot fix
Panels will not stop you following a conversation across a quiet floor. That gap is what masking is for, and knowing the difference stops you buying the wrong thing twice.
How to tell which you need
- Stand in the empty space and clap once, hard.
- If the clap rings on with a bright tail, the room needs absorption. Panels, ceiling tiles, carpet, and soft furniture.
- If the clap dies immediately but you can still follow a conversation three desks away, the room needs masking instead.
- Most offices have some of both. Treat the ringing first, then get masking quoted for whatever is left.
Absorb, block, cover, distance
These are the four tools, and they are usually applied in this order. Absorb: soft surfaces that stop sound reflecting, which means ceiling tiles, wall panels, carpet, and furniture. Block: walls, screens, and desk dividers that stop sound travelling. Cover: masking, which raises the background. Distance: the floor plan itself.
The order matters because the first three interact. A reverberant room makes masking sound diffuse and fatiguing rather than neutral, because the masking itself reflects around the space. Absorption also makes blocking work better, since a barrier is less useful when sound simply bounces over it.
What NRC means and how much you need
NRC, the Noise Reduction Coefficient, is a figure from 0 to 1 for how much sound a surface absorbs. A hard plaster wall is near 0.05. A good suspended acoustic ceiling tile is 0.70 to 0.95. A thick fabric-wrapped panel is around 0.85 to 1.00.
The ceiling is almost always the biggest opportunity, because it is the largest uninterrupted surface in an office and nobody leans on it. Beyond that, treating roughly fifteen to twenty-five per cent of the remaining hard surface area is where most rooms stop improving noticeably. Spread panels around rather than clustering them on one wall, and prioritise surfaces facing each other.
Where panels do not help
They do not create privacy on a quiet floor. Absorption lowers the overall level, which can make intelligibility slightly worse, because a voice from a distance now arrives into a quieter background. This is the counter-intuitive result that surprises people who treat a room and find they can hear their colleagues better than before.
They also do not stop sound passing between closed rooms. That is the wall assembly and, more often than anyone expects, the shared space above the suspended ceiling, which is what the CAC rating of a ceiling tile describes.
Panels and masking together
The combination most offices actually want: an absorbent ceiling, some panels on facing hard surfaces, screens where people sit back to back, and masking over the top to cover what distance alone does not. Each one is doing a job the others cannot.
If the budget only stretches to one, the ceiling is usually the better first purchase in a room that rings, and masking is the better first purchase in a room that is already quiet and has no privacy at all.
What you need
- Your hands, for the clap test
- A device and a speaker, to hear what masking would add
- A tape measure, to work out hard surface area
- A floor plan, if panels and masking are both going to be quoted
Mistakes to avoid
- Adding masking to a bare, ringing room before any absorption
- Clustering every panel on one wall
- Expecting panels to make conversations private
- Treating a room and forgetting the space above the ceiling grid
Questions
Do acoustic panels help with office privacy?
Only indirectly. They stop a room ringing, which makes it more comfortable, but they can make distant speech slightly easier to understand by lowering the background. Privacy comes from blocking and masking.
Should I install acoustic panels or sound masking first?
Panels first if the room rings when you clap. Masking first if the room is already quiet but you can follow conversations across it. Most offices need both, in that order.
How many acoustic panels does an office need?
After the ceiling, treating roughly fifteen to twenty-five per cent of the remaining hard surface area covers most of the benefit. Spread them out and prioritise surfaces that face each other.
What is a good NRC rating?
For a suspended ceiling tile, 0.70 and up, with 0.90 available. For wall panels, 0.85 to 1.00. A bare hard wall is around 0.05.
Get it quoted
Tell us about the space and we will pass it to as many installers in your area as we can, so you get real quotes to compare. They survey it, fit the system, and tune it. Free, and nothing to pay at any point.
