Home / Guides / Sound masking / California
Los Angeles, the Bay Area, San Diego, Santa Barbara
Sound masking in California
California is too large to be one installer visit. Los Angeles, the Bay Area, San Diego, and Santa Barbara each need a company that will actually come to the building. People search the state, Los Angeles, and Santa Barbara as separate questions. Put the city on the form.
One description, quotes you can compare
Describe the space once. We pass it to as many installers as cover the California city you name.
The city is the job
A company based in Los Angeles is not the company for a floor in San Francisco, or for Santa Barbara, unless they say they will make that trip.
The ceiling still sets the price
The national cost range applies in every one of these cities. An open ceiling and an occupied floor move it more than which metro the building is in.
How to get quotes in California
- Write Los Angeles, the Bay Area city, San Diego, Santa Barbara, Sacramento, or wherever the building is.
- Add the square footage, the ceiling, and whether people are working there.
- Send it. California is filled in.
Which California
Los Angeles and its neighbouring cities are one conversation. The Bay Area is another, San Diego another, and Santa Barbara comes up on its own, separate from Los Angeles even though the map makes them look close. Sacramento and the Central Valley are another drive again.
Name the city. A quote from a company that covers "California" and will not survey this building is a guess.
Get quotes for a California building
Tell us the city, the size, and the ceiling. We pass it to as many installers and suppliers as cover that part of California. Free, and no obligation.
What to budget
Installed systems run about $1.50 to $2.50 per square foot in a new fit-out, and $2.00 to $3.00 where people are already working and the crew has to fit around them. An open or exposed ceiling adds about twenty to forty per cent, because the speakers have to be aimed and finished rather than set into a tile. Commissioning, the visit that sets the level with a meter and writes it down, is usually $1,500 to $4,000. A 10,000 square foot retrofit is usually $20,000 to $30,000 before that visit.
Nothing in that range is a Los Angeles price or a Bay Area price. Read the quote against the ceiling and whether the floor is occupied. The sound masking system page sets the same figures out in more detail.
Small spaces
A few rooms often get no reply from companies whose work is whole floors. We pass those to suppliers who sell a complete kit and advise from a floor plan. Larger floors go to installing companies that cover the city you named. You pay nothing, and there is no obligation.
What you need
- The city, not only California
- Square footage and ceiling type
- Whether the space is occupied
- A floor plan
Mistakes to avoid
- Using a Los Angeles quote for a Bay Area building
- Leaving the city blank
- Accepting a quote with no commissioning line
- Assuming Santa Barbara is covered because Los Angeles is
Questions
How much does sound masking cost in Los Angeles?
About $1.50 to $2.50 per square foot for a new fit-out and $2.00 to $3.00 for an occupied retrofit, plus $1,500 to $4,000 to commission it. The Bay Area, San Diego, and Santa Barbara use the same range.
Do you cover Santa Barbara separately?
Yes. Name Santa Barbara on the form. It is a different visit from Los Angeles, and the quotes should come from companies that will go there.
Is the Bay Area the same as Los Angeles?
No. Name the city. A company that covers one does not automatically cover the other.
Does SoundMasker install systems in California?
No. We pass the enquiry to companies that do. You pay nothing, and there is no obligation.
Get it quoted
Tell us about the space and we will pass it to as many installers in your area as we can, so you get real quotes to compare. They survey it, fit the system, and tune it. Free, and nothing to pay at any point.
